Radon Linked With Cancer: How to Ensure Your Home is Radon-Free

Radon is responsible for at least 15,000 to 20,000 getting lung cancer deaths each year in the U.S. In fact, radon exposure is the second-leading cause of lung cancer in the United States. This tragedy is compounded by the fact that both radon testing and radon mitigation are simple and inexpensive. While nationally 1 in 15 homes may show dangerous levels of radon, the average levels in many parts of the mid-Atlantic may be two to three times higher than this. There are no immediate symptoms of radon exposure and you cannot see, taste, feel, or smell radon. Cancer can show up five to 25 years after exposure and about 12% of lung cancer diagnoses are caused by radon.

Where Radon Comes From

Radon is a radioactive gas that occurs naturally in the soil. It is a byproduct of uranium decay. Radon can be found in-new homes, older homes, homes in need of repair, homes without basements; there is no pattern. Your neighbor’s home might be radon-free, while your home has dangerous levels. Radon can come from the ground beneath a home, well water, and various building materials. The only way to know is to test your home, which can be done for less than $30 with a simple kit available at most hardware stores.

Before Buying a Home:

  • Ask the seller for a copy of the home’s radon test results. If the home has not been tested, ask your home inspector to include a radon test in his report.
  • Make sure that the Radon Testing Checklist items were met.
  • Make sure that the last test was recent, at least within the past 2 years.
  • Make sure that the seller has performed the test in the lowest, livable level of the house. This usually means the basement, but if the home has no basement, test in the lowest level of the house.
  • Ask that the home be tested again if any changes have been made to the home’s heating, ventilation, and air conditioning system since the last test was done.
  • Should you decide to renovate an unfinished part of the home, test for radon before work begins. It is much easier to install a radon system in an unfinished room. If your test results are close to the EPA action level (4.0 pCi/l), test the space again after work is completed.

When renovating an unfinished part of a home or building a new home, look to minimize radon presence.

To Minimize Radon When Building a New Home:

  • The integrity of the slab should be maintained at all times.
  • Sump pits need to be installed with a sealed cover.
  • Use a gas tight radon drain for all floor drains.
  • When framing, run a radon vent pipe from the basement to the high part of the attic. This pipe should not be to close to the attic eaves, so that a radon fan can be easily added at a later date if needed.
  • If a sump pump is not required for the basement or if the construction is slab on grade, have drain tile looped around the perimeter of the inside of the foundation and have it terminate with a 3 inch PVC “rough in.” A 3″ PVC vent pipe is sufficient for spaces that are less than 2,000 square feet. Use a 4″ PVC “rough in” and a 4″ PVC vent pipe for spaces larger than 2,000 square feet.

How to Measure Radon

Homeowners can test for radon themselves. Order a radon test kit and when finished, make sure to return the radon test to the laboratory with all the required information filled out. Be sure to follow the test kit instructions to the letter. One of the most common mistakes is over or under exposing the devices. A radon test result of 4 picocuries (a picocurie is one trillionth of a curie and measures radioactivity) per liter or higher is considered to be a high radon level. The average radon level in homes is 1.3pCi/L and .4pCi/L outdoors. The 1.3 pCi/l national average includes homes in many regions that do not have radon issues. Keep in mind that the 4.0 pCi/l standard was established as a matter of practicality, not safety. EPA officials at the time were unsure whether the technology and methods employed in 1984 were capable of reducing radon levels further. Recent studies show a significant risk of lung cancer when exposed at levels between 2 and 4 pCi/l. EPA recommends reducing radon levels to below 2pCi/l if possible.

If your home does have Radon

Costs to hire a radon removal professional to lower radon levels average about $800 to $1,200. Homes with crawl spaces or without gravel under the slab cost more. Many radon removal configurations exist and include sub slab depressurization (SSD), SSD with a crawl space, and air exchangers. The work required for a successful radon mitigation are beyond the skills of most untrained homeowners.

What to Consider When Hiring a Radon Abatement or Mitigation Firm

  • Ask to see proof of their certifications from National Environmental Health Association (NEHA) and/or the National Radon Safety Board (NRSB).
  • Contractors must also be licensed as home-improvement contactors in each state they wish to work. The District of Columbia is an exception in the case of radon work.
  • Make sure the contractor is fully insured.
  • Have them describe all of the work they will be doing.
  • Sign a contract and see that it includes all promises that were made verbally.
  • Don’t pay for work until it is complete. Down payments are rarely required.
  • Ask for at least a 20-year transferable warranty.

Call on the Quickbooks Technical Support Phone Number to fix QuickBooks issues

QuickBooks is developed & marketed by Intuit for businesses that are small & medium-sized. Also, it provides cloud-based versions and on-premises applications for accounting to manage & pay bills, accept business payments and to carry ou payroll functions. If you’re a QuickBooks user and stuck in this popular accounting software issues, then dial the toll-free Quickbooks Support Phone Number.  

Intuit also integrates it with web-based features like:

  • Remote access capabilities
  • Electronic payment functions
  • Online banking and reconciliation
  • Mapping via integration with Google Maps
  • Remote payroll assistance & outsourcing
  • The marketing features through Google
  • Better email functioning through Microsoft Outlook & Outlook Express

Intuit has also added other functions in the 2008 version to help its users such as pre-authorization of electronic funds, import from Excel spreadsheets, time tracking of additional employees and so on. In June 2007, the organization announced that QuickBooks software would run on Linux servers because the previous one only supported in a Windows server.

If you want to install the QuickBooks Database Manager, then follow the below instructions to configure it for multi-user access.

  1. Firstly, you need to Download and Install QuickBooks Desktop on the computer.
  2. Select the option Switch to Multi-user mode from the menu of QuickBooks File.
  3. In the Multi-user hosting setup, select Yes.
  4. On the information window of Multi-user setup, select OK.
  5. To add up all the necessary users:
  • Go to Company and then Set Up Users.
  • Go to Passwords, Set Up Users and then Add User.

Quickbooks Technical Support Phone Number is always there for you to provide instant support if you’ve encountered in Quickbooks installation issues.

Here, we mention some common ways to solve QuickBooks glitches without anyone’s help:

  1. Use Auto Data Recovery: Try to restore the data file by utilizing the option of Auto Data Recovery.
  2. Fix up QuickBooks application: Put your efforts in fixing the QuickBooks application.
  • Run Reboot.exe file for re-registering QuickBooks objects.
  • Repair the file of Microsoft.NET framework manually installed on the system.
  • Perform a clean QuickBooks reinstallation.
  • For troubleshooting all the damaged files & components, run the QuickBooks Component Repair Tool.
  1. Update QuickBooks: The package of QuickBooks 2012 R14 service helps you in fixing unrecoverable file errors. So, to update the QuickBooks installation with the service package:
  • While opening QuickBooks, press the Ctrl key.
  • Click on Help and then Update QuickBooks option.
  • Click on Update Now on the screen of ‘Update QuickBooks’.
  • Select New Features.
  • Click on Get Updates.
  • Exit QuickBooks application after the complete update.
  1. Open a sample file: If you have difficulty in opening a company file without facing an error, then try to open a sample file:
  • While double-clicking on the QuickBooks icon, press the Ctrl key.
  • Continuously press the Ctrl key until the QuickBooks applications show ‘No Company Open’.
  • Click on the ‘Open a sample file’ option.
  • Then, choose a sample file and open it.
  1. Replicate the company file to the Desktop: You can try the option of changing company file location you want to open up. Sometimes, this solution will work out because of the storage path limitation of the company file. To change the QuickBooks file location:
  • Open the folder where the company file is present.
  • Use the Locate option for searching the QBW file.
  • Then, Copy & Paste the company file on the Desktop.
  • Launch the QuickBooks open while pressing the Ctrl key from the keyboard until it shows ‘No Company Open’ message.
  • Click on Open and browse to the copied company file.
  • Lastly, click Open.

Still, an error restricts you in using QuickBooks application then tap the Quickbooks Support and fix it promptly.

Sophisticated Features of SA Bemer Pro Set and Bemer Classic Set

SA Bemer Pro Set and Bemer Classic Set

The formation and growth of blood clots in the microcirculation network can be reduced and avoided by the SA Bemer Pro Set and Bemer Classic Set. The former comes with a set of four applicators while the latter has only two. Both the devices are aimed at improving the blood circulation and clean the cells within the entire cardiovascular system. At the same time they control blood perfusion within the capillaries and   Arterioles. The process also helps in the restoration of hormone generation within the bloodstream. The other obvious benefit is the restoration of capillary exchange. Diffusion enhancement happens through the enhanced permeability of the capillary walls. This process restores the healthy conditions of the blood along with the veins, vessels, tissues, soft muscles and the Venules.

SA Bemer Pro Set and Bemer Classic Set – Venous Return Control

Venous return is a process by which the blood flows back to the heart from the organs. The pressure of blood flow varies for every cycle of breathing, namely the inhalation and exhalation. The balance between the flow of blood out of the heart and into the heart can be achieved when the volume, pressure and the heart stroke rate remain at the standard levels. When the body is engaged in athletic activity, exercise and other physical action, the flow of blood into the heart and out of the heart will naturally increase. This will also result in the increase of blood pressure. In such cases the stress on the heart muscles is more. By using the SA Bemer Pro Set and Bemer Classic Set it is possible to control all the pressure and flow parameters within the standard limits.

SA Bemer Pro Set and Bemer Classic Set- Oxygen Utilization

The utilization of oxygen supplied by the lungs into the bloodstream is of course not 100%. The effective utilization is called “apparent”. This is actually the difference between the oxygen which gets dissolved in the blood stream and the saturation level. The variation in this difference determines the actual utilization of the oxygen. By the application of SA Bemer Pro Set and Bemer Classic Set it is possible to increase the oxygen utilization by more than 30%.

SA Bemer Pro Set and Bemer Classic Set – Blood Perfusion

The delivery of blood to a tissue within the capillary bed can increase when the external and internal temperatures increase. Perfusion is also the blood flow within the circulatory system. The abnormal conditions in perfusion can occur when the blood volume through the circulatory system becomes excess or gets deleted. In such cases the normal flow of blood gets affected. By using the SA Bemer Pro Set and Bemer Classic Set it is possible to restore the perfusion to normal levels.

SA Bemer Pro Set and Bemer Classic Set – Pediatric Patients

The balance in the pulmonary and cardiovascular activities among the pediatric patients can get upset due to variations in the physiological balance. In such cases the application of SA Bemer Pro Set and Bemer Classic Set is considered to be highly critical for restoring the balance. SA Bemer Pro Set and Bemer Classic Set can help achieve this goal.


Taking Your Business to a New Level

When you start a new business and cannot justify with the accounts task, it is best to find accounting software for small and emerging businesses which fulfills your accounting needs and meets your budget. Payroll management, unforeseen expenses, taxes, and cash flow management are the problems you face when setting up a new company. Accounting software is the solution to all your time-consuming tasks. A number of companies are providing this software. One of them is Xero bookkeeping services sunshine coast, making it easy for you to manage your accounts.

About Xero Software:

Xero is cloud-based accounting software which can be accessed from anywhere and anytime. It helps the owners to track and manage their wages, revenues, receivables, payable, expenditure, and cash flow. It automatically reconciles all your bank transactions making it easy for you to control and manage your finances. Xero software also gives you the additional benefit to protect your data with bank-grade encryption, and you can set user permissions to control the data your employees could access.

Features of Xero Book-Keeping Services:

Xero bookkeeping is a very good software for business owners who are in the phase of establishing their business, and its feature includes budget estimation, a record of payable and receivable accounts, and stock management tools. Xero software has an easy account setup, and it’s starting up task comprises of connecting you with your business account, making a list of customer and recording your invoices. Some of the features which make Xero software more interesting are:

Online Invoicing:

Xero combines with a number of payment processes making it easy for you to make or receive payments online, and you can also email the invoices directly from the software. It gives the opportunity of scheduling your invoices. Payments can be made on time due to automatic payment reminders.

Keeping track of Stocks and Orders:

After entering the price and bills, it would be easy for you to keep track of your stock. The purchases could also be made with the help of the software. The payment of the purchases can be made online, and for more complex purchases, advanced inventory integration is available.

Smart Reconciliation:

Xero makes the process of reconciliation simple by matching the bank deals with the data entered in the software. To make the reconciliation process easy and faster, it also features following the rules of the bank

Instagram’s Crackdown on Fake Followers

instagram followers

In case if you have gone on to rely on a fake app to drive in more followers on Instagram then social media van has taken off in a big way. Do expect the number of audiences to drop all of a sudden. In a social media profile, this app is cracking on fake likes or even followers. You can even blame it on shoddy apps which can work on an audience size for a shoddy Instagram account. A lot of third-party apps uses such a platform so as to enhance their popularity. A notice from the company did go on to specify that.

With the aid of computer algorithms, the problematic accounts have become a target. You are going to receive a message stating that all fake likes are subject to removal. Even the comments given by others to the users are in the same position. This app does not throw the blame on third parties for fake activity. It does start with the process of convincing users of giving their user id along with the password to their respective accounts. If given such access the apps can take over the account so as to generate artificial followers or likes. This means that this app would request customers to change their password. This is a recurring drive and any third party apps that increase the number of followers would have its impact seen. A new experience in social media profile would emerge by such measures.

Till date, it has not come forth that they did use to churn in misinformation. A series of measures to cut down on such activity would emerge in the weeks to come. The feature of photo sharing will help to streamline accounts and detect any suspicious activity. Starting from today any accounts which have an element of doubt would be shown the door.

A series of measures are taken by the company to prevent such activities on its platform. For starters, the app would go on to churn an inbuilt message to accounts which rely on such services. This message would go on to update the users about the removal of fake likes. In addition comments or followers would also emerge. Then the company would ask the user to secure their account by changing their password. People who use such accounts share their user id and password with third parties. They operate on behalf of the user to generate likes or comments. Not only irresponsible behaviour in such situations there does occur a security breach.

If you share your login in details with third parties a strong chance exists of even your account prone to hacking. If you have gone on to share such details, the company strongly advises you to change your password.

In recent times a lot of celebrities have gone on to use Instagram so as to enhance their popularity on this platform. More and more users are resorting to the use of the third party to increase their number of followers.

How Choice Of The Programming Language Affects The Appointment Booking API

It must be said of the typical programming language that there are some common points that developers look to take advantage of. So when an appointment booking API is to be implemented, the first question that would come to any programmers mind is the set of operational parameters that need to be provided. Often with different clients the requirements are quite different even if it is for the appointment booking function.

Rarely has so much been dependant on the correct choice of a programming language as with the work with APIs. It has to be understood in the very context of the manner in which the applications are usually put to use.

The flexibility factor with turning out an appointment booking API

By the flexibility factor, it is referred to the ability of the application to be as suited to the needs of situation. Thus a banking application would have a totally different set of operational parameters as compared to a hotel reservation application. In most of the programming practices of today, there is an increasing tendency to use templates as far as possible. This does save considerable amount of time in the development stages and more attention can be paid to the actual testing of the product.

The integration factor with some of the popular programming languages

When a modular approach that relies on readymade templates for most part is done, it is important that a fair bit of ability to integrate the entire working is taken into consideration. This is one factor that can differ with the different languages in use commonly and it would speak volumes of the skills and ability of each programmer to pull off a successful consolidation of systems.

The changing approach that future trends could present themselves with

It is important to have a set of practices that would be valid not just at the present time but could well be applied going forward into the future as well. The more future ready an effort is the more enduring the work would turn out to be. This has been a common issue with the more popular of programming languages as well as in the application of some of the more recent developments in the field.

If the past approaches to selecting programming languages are considered, then the future would point to an increased use of modular structured systems that ensure a better compatibility as well as a more complete application at best.

The trends and in particular with programming and with the use of programming languages would point to needs or requirements of the market. It should never be taken as sacrosanct to be considered unchangeable. This is the sort of flexibility that a typical programmer brings to the field and must be valued for the practical aspect to the approach more than anything.